|
|
|
|
|
|
All
Powercall's New 6-Series Line of sirens are
NFPA and SAEJ1849 Compliant |
|
The Powercall 6-Adam is
our 200 Watt electronic siren that requires (2) 100
Watt drivers of either 11 or 8 ohms. These sirens
are now built by the 100 lot, allowing us to drop
our pricing down a bit. The Adam is now $262.50 vs.
$271.20. Making these in a much higher quantity
allows us to discount the cost directly back to our
customers. Contact me for any questions regarding
the Adam siren. Thank you! |
 |
 |
|
|
070107:The
current version of the 6-Adam consists of Dual
Output Transformers and has a set of speaker wires
for each speaker to be wired, eliminating the
possibility of you wiring the speakers incorrectly.
The plug in the back is also now a strong white
Molex connector. |
 |
 |
 |
 |
 |
 |
|
|
|
Enter your Quantity:
|
|
|
|
|
|
 |
|
|
|
|
|
The Powercall® 6-Adam siren is now IN STOCK AND
AVAILABLE FOR IMMEDIATE DELIVERY. This siren
is a newer technology siren, only measuring
5x5.5x2.25. That's 5 Inches Wide by 5.5 Inches Deep by 2.25 Inches
High. This new siren meets all
NFPA Requirements and SAE J1849 requirements for
sound. The siren puts out a steady 200 Watts and
absolutely requires one 200 Watt Siren speaker setup or (2) 100 Watt
Siren speakers. You can use any 200 Watt Siren
Speaker setup already in your apparatus if is
already installed. Powercall offers specially tested
siren drivers to meet these requirements. We
recommend 2 speakers if you have the room as you can
get more sound from 2 speaker.
This siren has your basic
Power, Ground and a pair of Speaker leads for each
speaker making this an EASY
installation. Our microphone is
an Australian high quality tested heavy microphone
(Same as the DX5 Microphone). The background of the siren
lights up a pretty Blue and the on/off switch lights
up a heavy Red for good visibility at night. The
latest release of this siren has a better wiring
harness connector, Dual Output Transformers for easy
speaker installation and avoids any speaker wiring
issues that were encountered in the previous release
of the siren.
|
|
1) Yes
the siren is NFPA and SAEJ1849 Compliant |
|
2)
Currently, there is the 6-Adam®
and 6-Baker. |
|
3)
Powercallsirens will be welcoming dealer inquiries.
Any dealer that is set up with Powercallsirens must
understand that the Sirens will need to be paid for
up front and that a minimum order of 6 sirens must
be ordered. Contact David for more information. |
|
4) Yes,
this siren is a true 200 watt Dual Driver siren. It
will also require 2 speakers or 1 "Dual Driver"
speaker which are all available via Powercallsirens
or you can use your existing setup. |
|
5)
Powercallsirens does not accept Purchase Orders for
its sirens. All of our products must be paid for in
advance via Visa, MC, AMEX or Discover. We also
accept company checks and certified funds. |
|
6) WHAT
IS THE 6-ADAM? The 6-Adam for those who know about
the old PA-200 sirens, was the sound that the siren
made when you put the knob between the yelp and
Hi-low in just that right spot. |
|
 |
|
 |
|
|
|
|
|
|
|
|
|