The Powercall X7200 Siren is NOW AVAILABLE! This siren has been modified by popular demand from our customers, unlike the X71 siren. We have had many requests to make this siren a remote and a stand alone siren. As you can see from the pictures above, you can mount this siren on your dash and operate it using the built in switch or the siren also comes with an additional switch (Not shown) that you can use to interrupt the power or ground wire, while leaving the unit's switch in the on position to activate the siren.

As in the X71, this siren only has one tone, the Powercall Siren Tone which when activated, comes on within 2-3 seconds of the switch being toggled. This unit is a dual power transformer 200 Watt electronic siren and absolutely requires 2 (Two) 100 Watt siren drivers. We recommend our GM60 or P100 speakers, but any 100 watt style driver will work just fine. 8 or 11 ohm speakers only.

* Dimensions are 6.75 x 5 x 2.25
       6.75 Inches Wide x 5 Inches deep 2.25 Inches Tall
* Roughly 6 feet of Wire.
* External 20 Amp Fuse
* Surface mounted molex connector
* Easy 6 wire hookup. Power, Ground & 2 sets of speaker leads (One per siren speaker)
* Heavy Duty built in On/Off Toggle Switch
* Additional Toggle for remote operation
* Requires two (2) 100 Watt Siren Speaker
* NFPA Compliant under the 6-Adam Certification
* Meets the SAEJ1849 Requirement for Sound
* NOW IN STOCK AND READY FOR SHIPMENT!