Powercall X71 100 Watt 2 Tone Emergency Siren
|POWERCALL X-71 Siren
**Currently IN STOCK**
|The X71 siren is a 100 Watt, TWO TONE (Powercall and Whoop Tone) emergency siren. The unit now has an air horn feature, which is optional and requires additional wiring and a button if you choose to use it. Powercall is in the process of altering the switching option for this siren, but for now, the main use is the 2 tone's. The unit is a remote Powercall Siren that is controlled by a supplied 3 position (Center off) toggle switch which comes with the unit. You can also use your own triggering method if you choose as long as you are familiar with electronics.
This siren requires ONE speaker (Sold Seperately) and CANNOT be used with 2 speakers. Our recommendation for a speaker is the Feniex Triton or the Whelen Projector. The Triton is our newest release for the sirens. It's the same design and layout as the Projector, but over $60.00 less. You can see the Triton by CLICKING HERE!
This siren is a simple installation BUT, it requires that you follow the instructions closely. You have your basic Power wire (RED). A dual ground (JOINED BLACK/WHITE) for your unit/switch center, a wire for the Powercall tone (ORANGE) and a wire for the whoop tone (YELLOW). Lastly, a Pair of speaker leads and that is it.
The X71 will operate any 100 Watt siren speaker mounted anywhere within your vehicle. Note that we don't recommend Galls or Signal product speakers. Our best recommendation is the Feniex Triton which can be seen by CLICKING HERE!
The current unit that is out currently has a terminal strip below the siren, so you don't have to worry about any wiring harness problems. The hookups are clearly labeled on the siren.